Light surface corrosion can appear on exposed brake discs while a vehicle stands, and a parking brake may stick after long storage. But releasing a parking brake is not safe generic advice: the car must remain securely restrained according to its own manufacturer instructions and storage surface.
Read the parking instructions first
Find the handbook guidance for long-term storage, transmission position, electronic parking brake, battery disconnection and wheel chocks. Modern vehicles may apply brakes automatically or rely on electrical power for release and service modes.
Aston Martin's storage manual, for example, tells operators of covered vehicles to leave the parking brake off, use the appropriate gear or selector position and chock wheels on a non-level site. That is a manufacturer-controlled procedure, not a rule for every car.
If the handbook is silent or the site is sloped, ask the manufacturer or a competent workshop. Do not leave a vehicle unrestrained while experimenting.
Park clean and dry where practical
After washing wheels or the underside, follow the handbook on drying the brakes before extended parking. Some manufacturer information advises a short drive after cleaning. Do not drive merely to dry brakes if another safety check is outstanding.
Avoid applying wax, oil or corrosion inhibitor to discs, pads, drums or friction surfaces. Masking brake parts is a core requirement for any nearby underbody treatment.
Inspect without dismantling
During storage, look through the wheel openings from outside the car. Record disc appearance, standing water and any fluid trace without reaching into the wheel or crawling beneath the vehicle. Surface colour cannot establish disc thickness, pad condition or safe operation.
Brembo explains that corrosion can form on disc surfaces during extended parking and discusses brake stiction. Its suggested movement procedure assumes a car that is otherwise ready and a safe area. Do not use it as a substitute for a pre-movement inspection.
Plan the first movement
Before starting, inspect the floor for leaks, check tyres, confirm pedal feel according to the handbook and make sure the route is clear. GOV.UK says brakes must work every time a vehicle is driven and that the car can be unsafe even with an MOT.
If a wheel appears locked, the pedal behaves abnormally, warning lights remain on or there is heavy corrosion, leakage or grinding, stop and obtain professional assessment. Do not apply excessive engine force to break the car free.
When the car is safe to move, begin at walking pace in a controlled area and verify braking response before road use. A short private-area check is not proof that braking performance meets the road standard.
Record what happens
Add parking method, storage duration, brake appearance and recommissioning findings to the lay-up record. If the same wheel sticks repeatedly, investigate the mechanism rather than normalising it as a storage quirk.
Combine this guide with tyres and flat spots, battery maintainer setup and recommissioning after storage so the first movement is the end of a checklist, not the first inspection.
Sources & checks
Checked 2026-11-10. Read the original instructions before acting.