Tyres can lose pressure, age and develop temporary or lasting deformation while a car stands. The correct storage action depends on the exact tyre, vehicle, duration and manufacturer guidance. Do not copy a high storage pressure from another marque.
Record the starting condition
Before lay-up, record tyre make, model, size, load and speed markings, visible date code, cold pressures and tread or damage observations. Include the spare where fitted. Photograph each sidewall and any existing flat or cut.
GOV.UK says tyres must be free from cuts and defects and points drivers to the handbook for pressure and routine checks. A storage plan does not override road-use pressure, load or condition requirements.
Seek tyre-professional advice for cracking, bulges, exposed material, repeated pressure loss, impact damage or uncertain age. Do not rely on tread depth alone.
Find the vehicle-specific storage instruction
Check the current owner's manual, service information or manufacturer guidance for long-term parking. Some manufacturers specify a temporary storage pressure or periodic movement; others do not. Aston Martin's storage manual, for example, contains high storage-only figures and a wheel-movement schedule for covered vehicles, followed by an explicit return to the correct road pressure. Those numbers are not generic advice.
If no storage instruction exists, ask the vehicle and tyre makers. Never exceed the limits applicable to the tyre, wheel and inflation equipment.
Prepare the contact surface
Park on a clean, firm, level surface free from oil, fuel and sharp debris. Do not place tyres on improvised absorbent materials that can hold water against them. If using shaped tyre supports, confirm their dimensions, load rating and suitability with the vehicle or tyre maker.
Avoid lifting the whole car onto stands solely from internet advice. Suspension droop, support locations and long-term body loading are vehicle-specific, and under-vehicle work has serious safety risks.
Check during storage
Use the interval in the vehicle or tyre guidance. Measure pressures cold with a suitable gauge and record ambient temperature. Investigate repeated loss rather than continually topping up.
If periodic movement is specified, plan who can do it safely and how the car will be made ready. A few centimetres may not equal the maker's instruction, while starting and moving a car brings ventilation, battery and brake considerations.
Recommission before road use
Return pressures to the vehicle's road specification before driving. Inspect every tyre for deformation, cracking, damage and loss, and check that valves and caps are sound. A temporary vibration after storage still needs cautious assessment; stop if it persists or the car feels unsafe.
Do not attempt to “drive out” a severe vibration at speed. Have the wheels and tyres inspected. Remember that a current MOT does not remove the driver's responsibility for roadworthiness.
Add the tyre record to the monthly storage checklist and the recommissioning guide. Treat tyre position, pressure and condition as recorded facts, not as a reason to move an otherwise unprepared car.
Sources & checks
Checked 2026-11-10. Read the original instructions before acting.