A paint chip is a break in a coating system, but not every chip is a suitable driveway touch-in. Its location, depth, existing corrosion, finish and proximity to bonded glass or safety-related parts determine the next question.
Record the chip while it is clean and dry
Photograph one wider view to establish location and one close view with a scale beside, not on, the damage. Record the date, panel material if known, recent impact and whether the edge is lifting. Do not sand first: the original boundary helps a repairer judge what happened.
Use four practical descriptions:
| Observation | Next question |
|---|---|
| Mark appears to be in surface dirt or transfer | Does handbook-approved cleaning remove it? |
| Colour coat damaged but underlying layer appears intact | Is a model-specific cosmetic repair suitable? |
| Bare material visible with no obvious spread | What preparation and matched coating does the maker specify? |
| Blistering, staining, lifting paint or perforation | Does the panel need professional corrosion and repair assessment? |
Do not diagnose the depth from a photograph alone. Modern bodies may use steel, aluminium, plastics and mixed-material joints, each with a specified repair process.
Check the repair boundary
Owner information from manufacturers commonly separates small paint-chip care from larger damage. Volvo says stone chips should be touched up promptly, while Ford corrosion-care information describes matching automotive touch-up for minor damage. Those statements do not define “minor” for your car.
Escalate chips at panel seams, folded edges, wheel-arch lips, structural areas, bonded-screen apertures and around sensors. Also escalate any damage where previous filler, a non-original coating or spreading corrosion is visible. A current MOT does not certify that emerging damage will remain safe; GOV.UK places ongoing roadworthiness responsibility on the user.
If the handbook supports an owner touch-in
Obtain the exact paint code and current instructions for the vehicle. Confirm the permitted cleaner, preparation, temperature range, layer sequence, drying time and disposal requirements. Use the smallest safe working area and keep the product label with the record.
Do not place rust converter, cavity wax or underbody coating beneath a cosmetic repair unless the specified system calls for it. Products with different purposes are not interchangeable. Avoid work in a damp, dusty garage or where ventilation and chemical controls are unsuitable.
Brief a body repairer clearly
Send the photographs before the appointment and ask:
- How far will the coating be removed to establish sound edges?
- Is corrosion present beneath the visible boundary?
- What substrate and previous repairs were found?
- Which coating system and cavity protection will be reinstated?
- Will trims, seals or lamps be removed rather than masked over?
- What inspection and care does the repair need later?
Ask for completion photographs before hidden trim is refitted where practical. Keep them with invoices and the vehicle corrosion record.
Check the repair later
Inspect the location after the stated curing period, after winter and at the next annual corrosion review. Compare the same angle and lighting. Look for edge lifting, staining or a returning bubble rather than treating a colour match as proof of a durable repair.
For contamination before inspection, use the road-salt cleaning plan. For damage beneath the car, start with underbody coating inspection because surface access and repair requirements are different.
Sources & checks
Checked 2026-11-10. Read the original instructions before acting.