For the car. For the long run.
The guides / Laying up

E10, E5 and fuel in a stored classic car

Check petrol compatibility and write a model-specific storage instruction without inventing a universal tank level or additive routine.

Fuel advice for storage is often repeated without a vehicle, engine, tank material or duration attached. Start by establishing what the car is approved to use, then obtain a storage instruction from the handbook, manufacturer or marque specialist.

Check E10 compatibility by identity

GOV.UK says most petrol vehicles can use E10 but identifies classic, cherished and older vehicles among those that may not be compatible. Its E10 checker requires manufacturer and may also require model, engine size and year. If a vehicle is not listed, GOV.UK directs owners to the manual or manufacturer and says to continue with E5 when in doubt.

Record the car's exact model, engine and year, the source consulted and its date. Do not infer compatibility from a similar model or an engine-swap description without documentation.

Find a storage instruction, not a slogan

Ask the relevant source to specify:

  • Approved fuel grade and octane requirement.
  • Recommended tank level for the actual storage duration.
  • Whether a stabiliser is approved, and the exact product and dose if so.
  • Whether the fuel system needs any action before recommissioning.
  • Special instructions for carburettors, injection, vented tanks or modified fuel systems.

“Fill it”, “drain it” and “start it every week” can each be wrong outside their original context. Draining introduces fuel-handling hazards and may leave parts of the system untreated; filling an unknown leaking system is also unsafe.

Inspect before parking

Investigate fuel odour, staining, damp hoses, damaged caps and known leaks before adding fuel or putting the car in an enclosed garage. Do not search for a petrol leak with a flame or improvised electrical equipment.

HSE treats petrol as a highly flammable substance. Keep ignition sources away, follow rules for containers and storage, and use professional help for draining or fuel-system work. A domestic garage is not a workshop simply because the door is open.

Keep the storage record

Write down fuel grade, filling station and date, approximate tank level, any approved additive and who supplied the instruction. Keep additive packaging or a photograph of the label. Do not mix products or exceed doses.

If the car will remain SORN or off road, separate the legal record from the fuel record. Fuel condition does not determine tax or insurance status.

Recommission cautiously

Before starting, check the floor and fuel system for leaks or odour. If old fuel, contamination or compatibility is uncertain, ask a specialist before turning the engine. Do not run the engine in the garage to “freshen” fuel; exhaust gases are hazardous even with the main door open.

After the first fill, retain the compatibility source in the vehicle file for the next owner or technician. GOV.UK notes that a one-off E10 fill in a non-compatible vehicle is not handled like petrol in a diesel, but prolonged use is not recommended; follow the official page for the current response.

Combine this with laying up a classic car, starting a stored car and the monthly storage checklist. The useful outcome is a documented vehicle-specific decision, not a generic fuel ritual.

Sources & checks

Checked 2026-11-10. Read the original instructions before acting.