For the car. For the long run.
The guides / Laying up

Storing a car outside for winter

Plan drainage, ground, cover fit, wind, contamination, security and inspections when a dry garage is not available.

Outdoor storage exposes the car and any cover to rain, wind, sunlight, frost, debris and animals. A good plan keeps the car on a suitable site, sheds water, limits cover movement and makes frequent inspection possible.

Check the site and legal status

Confirm you have permission to use the space and that the vehicle's tax, SORN, insurance and parking status fit it. GOV.UK says a SORN vehicle must be kept off the public road, for example in a garage, on a drive or on private land. Check the current official rules and insurer terms for the actual location.

Choose firm, level ground away from flood paths, overhanging branches, loose masonry and automatic sprinklers. Ensure water drains away rather than pooling beneath the car. Do not block access, drainage or emergency routes.

Prepare the car clean and dry

Follow the handbook for washing, underbody care and drying. Ford information, for example, calls for regular washing where road salt or coastal contamination is present and for body drains to remain clear. Complete any paint-chip or leak assessment before covering.

Remove food and damp loose items. Record tyre pressures, fluids, battery plan and parking restraint using model-specific instructions.

Choose an outdoor-rated cover by fit

Confirm the cover maker permits outdoor use for the storage duration and climate. Check vehicle dimensions including mirrors, aerials and spoilers. Identify soft contact points, straps and vents, and ask how the cover deals with wind and water.

A loose cover can move contamination across paint; an over-tight cover can load protrusions. Do not add ropes or weights unless the maker specifies them. Keep the hem clear of standing water and hot or sharp components.

Make storm checks part of the plan

Inspect after high winds, heavy rain, snow, nearby salting and rapid temperature changes. Record:

  • Cover displacement, tears and trapped debris.
  • Wet inner lining or condensation.
  • Water beneath the car and blocked site drains.
  • Tyre pressure or visible deformation.
  • New fluid patches, animal damage or nesting material.
  • Paint contact points and corrosion changes.

Remove snow only by a method safe for the cover and car. Do not let a heavy load remain simply because the cover appears intact.

Plan safe access

You need enough space to remove and dry the cover without dragging it on the ground. Store it cleanly during inspections. If the car must be moved to check it, complete the full recommissioning sequence rather than starting it impulsively.

An outdoor powered enclosure adds electrical, anchoring and weather-rating questions. Use equipment specifically approved for the location and have the supply assessed by a competent person.

Review whether the site is working

Compare photographs and condition after each severe-weather event. If the cover repeatedly becomes wet inside, moves on the paint or prevents inspection, change the arrangement. Temporary professional storage may be less risky than compensating for an unsuitable site with more layers.

Continue with car cover condensation, road-salt cleaning and the monthly stored-car checklist.

Sources & checks

Checked 2026-11-10. Read the original instructions before acting.